WEG Automation CFW-08 Wash A1 Plus AC Frequency Inverter for 1.5kW (2HP) 230V 3 Ph motor in VxF or Sensorless Vector Control control to 7.3A. Simple to set-up for use with either a Single Phase or Three Phase 230V input for a standard AC Induction motor. Suitable for use in the canning, drinks and food industry.
IP66 / NEMA 4X (indoor use) enclosure for washdown environments. Rated as 'dust tight' and protected against 'powerful jets of water'.
Can be used with either a Single Phase 230V or Three Phase 230V Supply without derating.
Size A - 165mm Wide x 216mm Deep x 265mm high. IP66.
Overload - 150% x 60 seconds every 10 minutes.
Speed Control Range - 0-300Hz.
Braking - To 39 Ohm minimum external resistor (not supplied) - see the Resistor Options linked below or use the 'Which Resistor' button on this page.
Features - Built-in membrane keypad, 2 x Analogue Inputs, 4 Digital Inputs, 1 x Analogue Output, 2 x Relay Contact sets.
Programmable from a PC via 'SuperDrive' Software.
EMC Filters - Class A to 2nd Environment C2 (Industrial).
Input Current - 16A (Single Phase 230V), 8.6A (Three Phase 230V).
Input Voltage - 200-240V Single or Three Phase +10%, -15% at 50/60Hz ±2Hz.
Rated at 40C Ambient.
Ventilation space above - 35mm
Ventilation space below - 50mm.
Ventilation space at sides - 15mm.
Ventilation space in front - 50mm.
Heat Loss at max output - 84W.
4 x Mountings for M5 bolts at rear.
Full part number is - CFW080073B2024EON4A1FAZ
Download the WEG CFW-08 Manual, Addendum and Easy Start Guide from the links below:-