WEG CFW11 Series AC Inverter for 75kW (100HP) 400V 3 Ph motor to 142A at high overload, or 90kW (120HP) to 180A when Fan/Pump rated. Operates in VxF, Sensorless Vector or Full Closed-loop Flux Vector. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC induction motor or permanent magnet synchronous motor.
**Available from stock only**
Size: Frame E, 335mm Wide x 358mm Deep x 675mm high. IP20
Weight: 65kg.
Overload - 150% x 60 seconds every 10 minutes, 200% x 3 seconds every 10 minutes (High Overload)
Overload - 110% x 60 seconds every 10 minutes, 150% x 3 seconds every 10 minutes (Fan/Pump Rated)
Speed Control Range: 0-300Hz (depending on control mode)
Braking: None.
2 Analogue Inputs, 6 Digital Inputs, 2 Analogue Outputs, 3 Relay Contact sets, USB Port (Type B), Real time clock, internal DC Choke.
Programmable from a PC via USB cable and free 'G2 Superdrive' software.
Input Current: 142A (High Overload), 180A (Fan/Pump Rated) via 200A High Speed Fuse.
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±3%
EMC Filter: Integrated, to IEC EN61800-3 Category C3 (industrial).
Wall mount in clean environment, cubicle mount or flange mount.
Rated 45°C Ambient.
Ventilation space in front: 20mm, Ventilation space above: 150mm, Ventilation space below: 250mm, Ventilation space at sides: 80mm.
Heat Loss at max output: 1570W (High Overload), 2050W (Fan/Pump rated)
Mounting via 4 x M8 bolts at rear on 200mm x 650mm centres.
Extended Warranty Available: When purchased with a WEG W22 Motor (see linked products below) the warranty for the motor and the AC Inverter can be extended to 3 years. Terms and Conditions apply, registration process is required.
Manufacturer part number is CFW11 0180 T 4 S Z. Internal code is 11114151. Sold under other names including Eurotherm Drives (Invensys) part ERCFW110180T4SZ.
Download the WEG CFW11 Manual, Parameter Reference and Programming Guide from the links below:-