WEG CFW11 IP54 AC Frequency Inverter for 1.5kW (2HP) 400V 3 Phase motor to 3.6A. Operates in VxF, Sensorless Flux Vector or Full Closed Loop Flux Vector control (when the optional encoder board is fitted).
Frame Size 1A - 255mm Wide x 235mm Deep x 410mm high. IP54.
Weight: 10kg.
Overload - 150% x 60 seconds every 10 minutes, 200% x 3 seconds every 10 minutes.
Speed Control Range - 0-300Hz.
Braking - To 220 Ohm minimum external resistor (not supplied) - see the Resistor Options linked below or use the 'Which Resistor' button on this page.
Features - Removable Keypad, 2 x Analogue Inputs, 6 x Digital Inputs, 2 x Analogue Outputs, 3 x Relay Contact sets.
DC Bus terminals for DC supply or common bus energy saving applications.
Programmable from a PC via free 'G2 Superdrive' software.
Input Current - as output current.
Input Voltage - 380-480V Three Phase +10% -15% at 50/60Hz ±2%.
EMC Filters to IEC/EN 61800-3 2nd Environment C3 (Industrial)
Wall mount.
Rated at 40°C Ambient.
Ventilation Space above and below - 100mm
Ventilation Space at sides - 30mm
Heat Loss at max output - 130W.
Mounting via 4 x M6 bolts at rear on 200mm x 425mm centres.
Full part number is - EU CFW11 0003 T4 O 54 FAZ (EUCFW110003T4O54FAZ) - Sold under other names including Eurotherm Drives (Invensys) as ERCFW110003T4O54FAZ
Download the WEG CFW-11 Manual and IP54 Addendum from the link below:-